Jaw Crusher is a kind
of Stone crusher, and jaw crusher is also called Rock crusher. This series of
Jaw crushers have many advantages which mainly used in breaking a variety of
ore and the medium-size chunk of materials. The jaw crusher can be used with the ore dressing equipment or used
independently. Jaw crusher can be used to produce the aggregate for subgrade,
railway ballast and construction sand and stone.
Jaw crusher working
principle:
The motor
drives the belt pulley and the belt pulley drives the eccentric shaft to
rotate, and make the moving jar approach and leave the fixed jaw periodically,
to crush, rub and grind the materials repeatedly, thus to make the material
slower and slower and gradually fall down and finally discharge from the
discharge opening.
The compression
strength of the materials to be crushed is less than 320MPA. it can be divided
into coarse crusher and fine crusher. We have all specification kinds of the
products, and its feedstock size is 125mm-750mm. It is the first choice for Stone
crusher plant; Primary jaw crusher is widely used in mining, metallurgy,
building materials, roads, railways, water conservancy and chemical industries,
etc.
The main structure of
the Jaw crusher are composed of stander, eccentric shaft, belt pulley,
flywheel, movable jaw plate, wrist plate ,adjustable gap screw, offsetting
spring, fixed jaw plate. The wrist plate also has the effect of guarding.
This Jaw crusher’s
crushing style is the type of driving extrusion. The motor drives the belt and
belt pulley to make the moveable jaw move through the eccentric shaft. When
movable jaw is rising ,the included angle between the wrist plate and movable
jaw become bigger to drive the movable plate to be close to the movable plate.
At the same time the material is squeezed and rubbed, rolled to achieve
multiple crushing.
When movable jaw is
descending, the included angle between the wrist plate and movable jaw becomes
smaller. Now the crushed material is discharged from the crushing cavity, with
the continuous rotation of the motor, the movable jaw crushing and discharging
the material periodically to realize batch production.
Jaw crusher main Features and Advantages
1) High efficiency and
low operation cost;
2) Flexible capacity;
3) Simple structure
and easy to operate;
4) Over loading
protection;
5) Easy replacement of
wearing parts;
6) Long service life;
7) High reliability;
8) Wide range of
choices;
9) Alternative
ordinary and hydraulic types.
Jaw crushers operating
environment
When in the process of
the great broken stones broke into small stones, the first crusher is often
referred to as ‘master’ crusher, the longest history and most solid crusher is
jaw crusher. When feed to jaw crusher, materials from the top of the entrance
into the broken room with tooth broken, the tooth broken tremendous force the
material to the top of the wall, it will be broken into smaller stones.
Supporting the tooth movement is an eccentric shaft. This axis runs through the
fuselage frame. Eccentric movement is usually arisen by fixed at both ends of
the flywheel axis. Flywheel and eccentric support bearing is often using
spherical roller bearings. Bearing working environment is extremely harsh.
Bearings must support enormous impact load\abrasive water and high temperature.
Though the working environment is extremely harsh, the jaw crusher still can
work very reliably. this is a key element to ensure the productivity.
More Mobile Crushers: Mobile Jaw Crusher, Mobile Cone Crusher